MOLD-CLEAN® Wood Cleaner and Surface Conditioner is a ready-to-use, pleasantly scented wood and surface cleaner formulated to remove stains caused by mold and mildew. Cleans and brightens weathered wood. Perfect for use before a Bora-Care with Mold-Care treatment. Can also be used to clean decks, siding, plastic furniture and play structures.
WHAT YOU SHOULD KNOW ABOUT MOLD-CLEAN
Mold-Clean presents a totally new revenue stream for your company. 5 times more effective than bleach alone. Spray it on. And clean up.
Many builders face mold problems in their structures. As lumber sits outside exposed to the moisture, amounts of mold can begin to grow. The builders know from experience that once the house is dried-in, the mold on wood will disappear. However, homeowners get very upset when they see signs of mold growing on the lumber of their new home.
If your distributor does not carry this product click here to buy now.
Mold-Clean is the cleaning solution to remove those unsightly stains. Your technicians can keep the lumber in an entire subdivision clean with minimal effort. Mold-Clean is not a pesticide, so it can also be sold to builders for their application.
Mold-Clean can also be used as an add-on sale to homeowners. PMP's can provide a cleaning service on decks, lawn furniture or siding. The product can also be sold directly to homeowners for their use.
Mold-Clean at a Glance
- Can be sold directly to builders
- Easy to apply
- Professional grade stain remover
- Eliminates mold and mildew stains
- Cleans and brightens weathered wood
- Ready-to-use
- Pleasantly scented
- Contains special wetting agents and detergents
- Penetrates deep into wood pores for thorough stain removal
- Minimizes or eliminates scrubbing
- Perfect for decks and fences
Remember, Mold-Clean is a stain remover only and will not kill loose mold spores. Should both jobs be required, use Mold-Clean to remove the mold stain and then apply Bora-Care with Mold-Care to kill and prevent future mold growth.
A fact you should know:
Neither cleaning or eliminating mold will stop it from reoccurring if conditions remain conducive for growth. The enemy is moisture. Permanently solving mold problems will require fixing and maintaining moisture levels in the home. Available in a 1-gallon jug and 5-gallon containers.
A Closer Look
Can be sold directly to builders
If you work with builders, Mold-Clean offers you a chance for additional revenue. Apply the product for the builder, or teach builders how to apply it and sell them Mold-Clean packaged in 1 gallon bottles. Mold-Clean creates an easy and continuous sale.
Easy to apply
Mold-Clean can be applied directly to an affected area of a wall or any other surface with a sprayer, sponge or damp cloth to thoroughly remove mildew discoloration and stains. Follow all label directions.
Professional grade stain remover
It’s the most powerful mold discoloration remover and surface conditioner available. In fact, Mold Clean is five times more effective than bleach alone. It’s the only product you need to truly clean a mold stained area without the intense smell of bleach.
The Science Behind Mold-Clean
Mold-Clean is a cost-effective unique technology that combines a strong oxidizing agent for color stain removal with a high pH tolerant surfactant to help wet surfaces and penetrate wood surfaces as an anti-corrosive stabilizer.
In the past, people have tried to use bleach, but its EPA label does not allow this use, it is not good at wetting surfaces and it leaves behind sodium hydroxide, which is very corrosive to metal fixtures and fittings and can damage wood. EPA also does not recommend bleach, but suggests a surfactant or detergent for cleaning mold.
Mold-Clean is the answer and combines all the appropriate properties.
Mold-Clean presents a totally new revenue stream for your company. 5 times more effective than bleach alone. Spray it on. And clean up.
Many builders face mold problems in their structures. As lumber sits outside exposed to the moisture, mold begins to grow. The builders know from experience that once the house is dried-in, the mold will disappear. However, homeowners get very upset when they see mold growing on the lumber of their new home.
Mold-Clean is the solution to remove those unsightly stains. Your technicians can keep the lumber in an entire subdivision clean with minimal effort. Mold-Clean is not a pesticide, so it can also be sold to buildersfor their application.
Mold-Clean can also be used as an add-on sale to homeowners. PMP's can provide a cleaning service on decks, lawn furniture or siding. The product can also be sold directly to homeowners for their use.
Mold-Clean at a Glance
- Can be sold directly to builders
- Easy to apply
- Professional grade stain remover
- Eliminates mold and mildew stains
- Cleans and brightens weathered wood
- Ready-to-use
- Pleasantly scented
- Contains special wetting agents and detergents
- Penetrates deep into wood pores for thorough stain removal
- Minimizes or eliminates scrubbing
- Perfect for decks and fences
Remember, Mold-Clean is a stain remover only and will not kill mold spores. Should both jobs be required, use Mold-Clean to remove the stain and then apply Bora-Care with Mold-Care to kill and prevent mold.
A Closer Look
Can be sold directly to builders
If you work with builders, Mold-Clean offers you a chance for additional revenue. Apply the product for the builder, or teach builders how to apply it and sell them Mold-Clean packaged in 1 gallon bottles. Mold-Clean creates an easy and continuous sale.
Easy to apply
Mold-Clean can be applied directly to an affected area of a wall or any other surface with a sprayer, sponge or damp cloth to thoroughly remove mildew discoloration and stains. Follow all label directions.
Professional grade stain remover
It’s the most powerful mold discoloration remover and surface conditioner available. In fact, Mold Clean is five times more effective than bleach alone. It’s the only product you need to truly clean a mold stained area without the intense smell of bleach.
The Science Behind Mold-Clean
Mold-Clean is a cost-effective unique technology that combines a strong oxidizing agent for color stain removal with a high pH tolerant surfactant to help wet surfaces and penetrate wood as an anti-corrosive stabilizer.
In the past, people have tried to use bleach, but its EPA label does not allow this use, it is not good at wetting surfaces and it leaves behind sodium hydroxide, which is very corrosive to metal fixtures and fittings and can damage wood. EPA also does not recommend bleach, but suggests a surfactant or detergent for cleaning mold.
Mold-Clean is the answer and combines all the appropriate properties.
Introduction
5 times more effective than bleach alone. Spray it on. Wipe it off. Make wood stain-free.
Mold-Clean can be applied by your pest control company or purchased directly from them for you to apply. Use industrial-strength Mold-Clean to eliminate stains and discoloration caused by mold and mildew on your structures.
Mold stains can occur anywhere wood is exposed to an environment where the moisture content is too high. Heavy rains and standing water breed mold spores which attach themselves to both the interior and exterior of walls and ceilings, causing discoloration, odor and decay. If you build in a high-moisture climate or in a place that gets a lot of rain, Mold-Clean is for you. Remember, Mold-Clean will not prevent or kill mold spores—it only cleans the stain. To kill and prevent future growth of mold, ask your pest company to apply Bora-Care® with Mold-Care®.
The average family produces up to 12 gallons of moisture in a home per day through cooking, bathing, even breathing. This means that every home is potentially a mold-friendly environment.
Because of its strength, Mold-Clean can remove stains with little or no scrubbing.
Mold-Clean at a Glance
- Can be sold directly to builders
- Easy to apply
- Professional grade stain remover
- Eliminates mold and mildew stains
- Cleans and brightens weathered wood
- Ready-to-use
- Pleasantly scented
- Contains special wetting agents and detergents
- Penetrates deep into wood pores for thorough stain removal
- Minimizes or eliminates scrubbing
- Perfect for decks and fences
Apply to wood, brick, concrete and other porous and non-porous materials.
Remember, the enemy is moisture. Permanently solving your mold problem will require fixing and maintaining water and excess moisture sources in your home.
A Closer Look
Easy for your Pest Control Company to apply
Mold-Clean can be applied by your pest control company. It is applied directly to an affected area of a wall or any other porous surface to thoroughly remove mildew discoloration and stains.
Professional grade stain remover
It’s the most powerful mold discoloration remover and surface conditioner available. In fact, Mold Clean is five times more effective than bleach alone. It’s the only product you need to truly clean a mold stained area without the intense smell of bleach cleaning products.
Introduction
5 times more effective than bleach alone. Spray it on. Wipe it off. Make wood stain-free.
Many remodelers face mold problems in their structures. As lumber sits outside exposed to the moisture, mold begins to grow. Remodelers know from experience that once the building is dried-in, the mold will disappear. However, homeowners get very upset when they see mold growing on the lumber of their home.
Mold-Clean is the solution to remove those unsightly stains. You can keep the lumber in a large area clean with minimal effort. Mold-Clean is not a pesticide, so it can be sold directly to remodelers.
Mold-Clean at a Glance
- Can be sold directly to remodelers
- Easy to apply
- Professional grade stain remover
- Eliminates mold and mildew stains
- Cleans and brightens weathered wood
- Ready-to-use
- Pleasantly scented
- Contains special wetting agents and detergents
- Penetrates deep into wood pores for thorough stain removal
- Minimizes or eliminates scrubbing
- Perfect for decks and fences
Remember, Mold-Clean is a stain remover only and will not kill mold spores. Should both jobs be required, use Mold-Clean to remove the stain and then apply Bora-Care with Mold-Care to kill and prevent mold.
A fact you should know: Neither cleaning or eliminating mold will stop it from reoccurring if conditions remain conducive for growth. The enemy is moisture. Permanently solving mold problems will require fixing and maintaining moisture levels in the building. Available in a 1-gallon jug and 5-gallon containers.
A Closer Look
Easy to apply
Mold-Clean can be applied directly to an affected area of a wall or any other surface with a sprayer, sponge or damp cloth to thoroughly remove mildew discoloration and stains. Follow all label directions.
Professional grade stain remover
It’s the most powerful mold discoloration remover and surface conditioner available. In fact, Mold Clean is five times more effective than bleach alone. It’s the only product you need to truly clean a mold stained area without the intense smell of bleach.
The Science Behind Mold-Clean
Mold-Clean is a cost-effective unique technology that combines a strong oxidizing agent for color stain removal with a high pH tolerant surfactant to help wet surfaces and penetrate wood as an anti-corrosive stabilizer.
In the past, people have tried to use bleach, but its EPA label does not allow this use, it is not good at wetting surfaces and it leaves behind sodium hydroxide, which is very corrosive to metal fixtures and fittings and can damage wood. EPA also does not recommend bleach, but suggests a surfactant or detergent for cleaning mold.
Mold-Clean is the answer and combines all the appropriate properties.
